Talkswitch 48-CA/CVA, 24-CA Call bridge, Accessing and using prompted call back from a telephone

When you access prompted call back from out of the office, you may change this number before initiating the call back. The benefit of prompted call back is that you do not need to set the number before you leave the office.

Accessing and using prompted call back from a telephone

1.Dial your office telephone number.

2.At the auto attendant, dial 6 to access the call back settings.

3.Follow the prompts.

a)Enter the telephone number where you would like TalkSwitch to call you.

b)Record an announced message if required. Call back is activated right after you initiate prompted call back and hang up. A small initial long-distance charge is incurred at your current location when you activate prompted call back.

Press # on an analog phone or		* 55 on a IP set to enter
command mode. Enter the password if required.
Enter the command as listed below.
To record a message:	65	#
To play the message:	75	#

The call back number shown is always the last number the unit dials in the last prompted call back session.

2.5.3 Call bridge

Call bridge allows you to use the TalkSwitch phone lines to make outbound calls or transfers to local and remote office extensions. It gives you access to your office-based long-distance savings plan from anywhere around the world. You will first need to call into the unit from an outside phone number.

T A L K S W I T C H C O N F I G U R A T I O N 1 0 3