Pioneer DRM-6NX manual Date and Time, Tcp/Ip, Server Password, Basic Installation

			Basic Installation
3. Click on Administration to access Administration		Date and Time
pages. You will be prompted to supply the Server		1.	On the This Server page, click Edit to open the
password for the initial session. The defauit password			Server Settings dialog box
is set to 'pass'.		2.	Open the Date/Time page
From the main menu you	may access any of the	3.	Specify the appropriate time zone in which the
			DRM-6NX Changer operates
following Administration	tools:	4.	To set the time using a time synchronization source,
Ö This server - To specify system settings related			choose Automatically and specify the time source:
			Ö Network Time Protocol (NTP) - for TCP/IP
to a DRM-6NX, To refresh the hard disk cache.			networks
To Upgrade firmware on the changer			Ö Novell Directory Services (NDS) - for NetWare
Ö File Rights - To set up access rights to volumes,			To set the time manually, choose Manually and
files and folders			specify the date in yy-mm-ddformat and time in
Ö Discs & Drives - To manage the drives and the			hh:mm:ss format using the 24 hour clock
inserted CD-ROM discs		5.	Click Close

ÖNetwork Settings - To specify settings for the

Ö	network protocols to use	TCP/IP
	Event Log - To view the event log that contains	The installation wizard is a convenient way to set up
Ö	occurrences involving the DRM-6NX	the DRM-6NX for your network environments.
	Statistics - To display statistics on the DRM-6NX	1. Click Network Settings

NOTES:

7To prevent users from accessing the volumes from the web interface disable the Enable access to volumes via Web browser (HTTP) parameter on the Network Settings - Web (HTTP) page

7Online help is available from all the DRM-6NX web pages. If you

need help on a specific task, click Help .

2. Click Wizard and the Wizard dialog appears

3.Choose TCP/IP to set up the DRM-6NX for the TCP/IP environment. Click Start to proceed with the installation. Follow the instructions on the screen without skipping any steps

4.Click Close when finished

5.Click Detailed View to verify the settings

Server Password

To protect the system files, it is important that you set the Server Password. The Server password is used in all primary protocols, (i.e. HTTP, NetWare (NCP), Windows (SMB), SNMP and FTP). For example, a user will be prompted for the Server password when accessing the Administration web pages for the first time each session.

To set the Server password, follow these steps:

1.From the This Server page, click Edit to open the Server Settings dialog box

2.Open the General page

3.Specify and confirm the Server Password

4.Click Close

NOTE:

7If you lose the Server password, you must restore the factory default settings. See "Restoring Factory Default Settings" on page 48.

17

<DRB1239>