Pioneer DRM-6NX manual The Others, Reset Button, Appendix B Troubleshooting

Appendix B: Troubleshooting

Reset Button

To restore the default settings using the Reset button:

1.Turn off the DRM-6NX

2.Press and hold the Reset button while you switch on the DRM-6NX (continue to press the 'Reset' button until the Network indicator flashes at regular two- second intervals.

Reset button

3.Release the Reset button and wait at least two seconds (one flash of the Network indicator)

4.Press and hold the Reset button for at least five seconds until the Network indicator remains constantly lit

5.Turn off the DRM-6NX then back on again

The factory default setting are now restored.

The Others

7When some 100Base switching HUBs are used, Collision LEDs may light at 3-second intervals. This is normal behavior and may be ignred.

7With some HUBs, the Link LED may not light. Reseat the cable until this LED light is on.

7If a 'write error on hard drive' mesage is returned during caching, re-format the drive with a low-level format (Select Hard Disk on This Server page and click on the Format button)

7When mulitple external DRM-6324Xs or other Pioneer 6-Discs Changers are connected, you must not insert multiple magazines at the same time. Please insert the next magazine after the caching is complete.

7If there are problems when using a Web Browser with an earlier release than Internet Explorer 3.0x, please upgrade the Web Browser to IE4.0x or an equivalient.

7Once File Rights (Windows Sharing) of the root directory are changed to Not Shared, the shared name is changed to NoName. Only restoring the factory defaults setting or editing the Root.txt file will clear this condition. The Root.txt file is found in the System/VolumeProperties folder.

49

<DRB1239>