|
| Accessing the Network Cache Changer Resources | |
4. | Double click the entry for your new | Windows for Workgroups |
|
| default name is PIONEER<nnnnnn>_NW, where | SMB | |
| <nnnnnn> is the last six digits of the | ||
| serial number) | In Windows for Workgroups on an SMB client, follow | |
5. | Enter your user name and password when prompted | these steps: | |
| if you are using the bindery mode (unless you are | 1. Start the File Manager | |
| already logged on) | ||
6. | Expand the SYS and Volumes folders to display all of | 2. From the Disk menu, select Connect Network | |
| available discs: | Drive… and | |
|
| dialog is displayed. You may have to click Browse>> | |
|
| to see the complete dialog) |
NOTE:
7If the Show All Volumes parameter is set to yes, the individual discs will be shown at the same level as SYS. Some applications
will not run properly unless the data is stored at root level. To avoid | 3. In the top listing, double click the entry for your new | ||
such problems, assign a drive letter to that particular volume. | |||
7. | To map a | where <nnnnnn> is the last six digits of the DRM- | |
6NX serial number) | |||
| locate: | ||
|
| ||
| Ö SYS for root level access |
| |
| Ö Volumes for access to all the discs |
| |
| Ö The volume name for access to an individual disc |
| |
8. | Right click the resource and select Map Network |
| |
| Drive... |
| |
9. | Select a drive letter for your |
| |
10. | Check Reconnect at logon if you wish to use the |
| |
| resource under the same drive letter the next time |
| |
| you start your computer |
| |
11. | Click OK (The |
|
NOTE:
7 If you cannot find the
31
<DRB1239>