Connections
Before making or changing the connections, switch off the power switch and disconnect the power cord from the AC outlet.
Ethernet
Hub
RJ-45 connector 10BASE-T/ 100BASE-TX
Turn off SCSI terminator No. 1 when disk drives are connected to the SCSI terminal. Then turn on the terminator of the connected disk drive.
SCSI cable
PIONEER
NOTE:
Assign SCSI IDs 2 to 6 to drives connected to the SCSI terminal.
Power cable
The accessory power cable is for use in North America. In other regions, please consult your dealer for information on how to purchase a power cable.
To AC wall outlet
Connect to a wall outlet. This unit is designed to operate at AC 110 – 240 V 50/60 Hz. (There is no power supply voltage switch because switchover takes place automatically inside the unit.)
10
<DRB1239>