Pioneer DRM-6NX Supported Disc Format, Media Diameter, Handling Of Cd-Rom Discs, Physical Format

Handling Magazines

SUPPORTED DISC FORMAT

Physical Format

The DRM-6NX changer supports 2048 Bytes/Block format only. The supported physical formats are Mode 1, Mode 2, form 1, Multi-session, and packet write (Variable).

Logical Format

Logical format to be supported is basically ISO9660 (includes Rock Ridge and Joliet Extensions)

NOTES:

7This unit does not support the use of CD-DA Audio Discs.

7This product does not support some CD-R discs written with packet writing. (This product does not support ISO9660 Level 3 discs which contain multi extent files. If these discs are used, multiple same filenames appear in a directory.)

MEDIA DIAMETER

120mm/12cm/4.72" discs only

HANDLING OF CD-ROM DISCS

ÖWhen holding discs, DO NOT touch the data surfaces (the shiny side of the disc). Hold the disc by the edges or by one edge and the center hole.

ÖDO NOT affix labels or adhesive tape to either side of the discs. Also, do not scratch or damage the pre-existing label.

DO NOT use damaged, cracked, or warped discs. If they break inside the unit, they may damage the optics. Discs rotate at high speed inside the changing mechanism.

INSERTING DISCS INTO THE MAGAZINE

Because the Changer has a front-loading magazine slot, inserting discs is easy. To insert discs into the magazine, follow these steps:

Step 1

Open a disc tray (open one at a time) by placing your thumb on the outer tab and pushing the tray out in a counterclockwise direction.

Step 2

Place a CD-ROM disc label side - down -, shiny side up in the tray.

Step 3

With your index finger on the disc tray tab, swing the tray back into the magazine.

Repeat these steps until you have inserted each disc into the magazine. Insert the magazine into the unit.

WARNING:

Discs must be placed in the disc tray label side - down -, shiny side up.

12

<DRB1239>