Pioneer DRM-6NX manual Web Browser HTTP, Network Settings, Wizard

Web Browser (HTTP)

This section describes how to configure the DRM-6NX for use via the web interface

The DRM-6NX supports HTTP over TCP/IP, which means that the changer works as a web server and is available on the Internet and intranets.

If you are using the DRM-6NX in a multiprotocol environment, proceed to the other relevant sctions of the manual:

Öpp. 18 – 19 - Microsoft & IBM Networks (SMB)

Öpp. 20 – 24 - NetWare (NCP)

Öpp. 25 – 26 - UNIX (NFS)

Network Settings

Use the Administration pages within the PIONEER Network Cache Changer DRM-6NX web interface to configure the DRM-6NX. Refer to “Accessing the DRM- 6NX Web Pages” on page 16.

Wizard

The installation wizard is a convenient way to set up the DRM-6NX for your network environments.

1.Click Network Settings

2.Click Wizard

3.Choose Web (HTTP) to enable Web browser access Click Start to proceed with the installation. Follow the instructions on the screen

4.Click Close upon completion

5.Click Detailed View to verify the settings and edit the configuration parameters

NOTES:

7Disable all protocols that are not intended for use with your system setup

7Online help is available for all parameters

7The parameter list is described in“Appendix A - Parameter List” on page 40

27

<DRB1239>