Pioneer DRM-6NX manual Appendix B Troubleshooting, The Front Panel Indicators, Normal Conditions

Appendix B: Troubleshooting

This section provides useful information to resolve difficulty you may experience with your DRM-6NX:

ÖThe front panel indicators

ÖErrors when accessing the DRM-6NX

ÖProblems running CD-ROM software

ÖDifficulties locating the DRM-6NX in NetWare

ÖProblems locating the domain controller in SMB

ÖProblems when accessing disc changers

ÖRestoring the factory default settings

ÖThe others

The latest information regarding this product is provided at http://wwwbsc.pioneer.co.jp/is/products/index.html

United States http://www.pioneerusa.com Europe http://www.pioneer-eur.com/product.htm

The Front Panel Indicators

The front panel indicators show the status of the DRM- 6NX. The indicators have the following functions:

ÖStatus - Flashes during startup (When the DRM-6NX is ready for use, the light goes out. The LED remains off, unless an error condition occurs.)

ÖHDD - Flashes to indicate hard disk activity and SCSI activity

Caution!

Never turn off the power when the hard disk drive is active (while a HDD indicator is flashing)

ÖNetwork - Flashes to indicate the presence of network traffic

ÖCHANGER - Lit when data is read from the internal changer and when the SCSI bus is accessed

ÖPower - Indicates that power is connected to the DRM-6NX (This LED remains lit and is only used to indicate power is present in the DRM-6NX unit)

Normal Conditions

The Power LED is hardware-controlled and is always lit when power is connected

This table shows the other front panel indicators under normal conditions:

Event	Status LED	HDD LED	Network LED
Initial power to unit	ON	ON	ON
During power-up/Self-test.	Flash	OFF	OFF
Approx. 30 seconds.
After power-up/Self-test	OFF	ON	Flash*
First disc inserted	OFF	ON	Flash*
Last disc removed	OFF	OFF	Flash*
Network Packet arrived	OFF	N/A	Flash*
Flash loading	1 Flash/sec	1 Flash/sec	1 Flash/sec

* The Network LED flashs when there is network traffic

45

<DRB1239>