Pioneer DRM-6NX Checking the Accessories, Cleaning the magazine, Cleaning the unit, Trademarks

Models: DRM-6NX

1 56
Download 56 pages 48.11 Kb
Page 7
Image 7
Handling Precautions

Handling Precautions

Cleaning the magazine

TRADEMARKS

Clean the magazine with a soft dry cloth. If it becomes dirty, wipe th w dirt away gently with a damp, soft cloth soaked in a solution of water with a few drops of mild detergent. If there is any moisture on the unit after cleaning, dry it off with a soft, dry cloth. Let the magazine cartridge air dry thoroughly before inserting discs or placing it in the unit.

Cleaning the unit

To clean the panel and the cover, use a soft, dry cloth to wipe off dust and dirt. If the cabinet is heavily soiled, wipe off the dirt using a soft cloth soaked in a neutral detergent diluted 5 to 6 times. Then wipe the water off with a dry cloth. Do not use benzine, thinner, insecticide or similar volatile chemicals, as they may dissolve or discolor the cabinet surface. If you use a chemical polishing cloth, carefully read the instructions supplied with it before applying to the cabinet.

ÖCD lens cleaner

The unit’s pickup lens should not become dirty in normal use. If it should malfunction due to soiling, check with the nearest PIONEER authorized service center. Lens cleaners for CD players are commercially available, however, use caution as some products may cause damage to the lens.

Trademarked names appear throughout this manual. Rather than list the names and entities that own the trademarks or insert a trademark symbol with each mention of the trademarked name, the publisher states that it is using the names only for editorial purposes and to the benefit of the trademark owner with no intention of infringing upon that trademark.

COPYRIGHT

Copyright © 1998/99 by Pioneer Electronic Corporation.

All rights reserved. This document contains proprietary information which is protected by copyright. Under the copyright laws, this manual may not be copied in whole or in part, in any media format, without written permission from Pioneer Electronic Corporation except for normal use by the original buyer(s). This exception does not allow copies to be made for sale to others. Under the law, copying includes translating into another language or format.

NOTICE

The information in this document is subject to change without notice. Pioneer Electronic Corporation makes no warranty of any kind with regard to this material. While every precaution has been taken in the preparation of this manual, Pioneer Electronic Corporation assumes no responsibility for errors or omissions. Neither is any liability assumed for damages resulting from the use of the information contained herein.

Checking the Accessories

6-disc magazines x 2

SCSI connector cover x 1

Power button cover x 1

Power cable (for U.S. and Canada) x 1

The accessory power cable is for use in North America. In other regions, please consult your dealer for information regarding purchase of an alternate power cable.

“Use Only Safety Licensed Power Supply Cord”

Cover for SCSI terminal

A cover used to prevent

 

inadvertent power off.

 

See page 8 for instructions

 

on use.

Operating instructions x 1

 

Internal network board serial number label x 1 This label relates to the internal network board.

The Serial Number information is needed to complete the product installation.

After installing the product, write the IP Address in the space provided and attach this label to the cover for future reference.

7

<DRB1239>

Page 7
Image 7
Pioneer DRM-6NX manual Checking the Accessories, Cleaning the magazine, Cleaning the unit, Handling Precautions, Trademarks