Archos 500973 user manual Troubleshooting, Restarting / Resetting Your Archos, System Recovery

TV+ MANUAL V1.0 TROUBLESHOOTING > P. 74

TROUBLESHOOTING

RESTARTING / RESETTING YOUR ARCHOS

•In the event that your ARCHOS freezes or does not respond anymore, disconnect

VJGRQYGTCFCRVGTYCKVHQTUGEQPFUCPFTGEQPPGEVKV9JGPVJGTGF.'&KPFK- cator stops blinking, press the Power button on the supplied remote control to turn on your device.

•ONLY use the Reset button, on the back of the device, if you need to relaunch the Installation Wizard. When you press this button, the ARCHOS will restart and

COGUUCIGYKNNRQRWRVQEQPÒTOVJGTGNCWPEJQHVJGYK\CTF+H[QWFQPQVTG- URQPFYKVJKPUGEQPFUVJGYK\CTFYKNNDGCWVQOCVKECNN[TGNCWPEJGF5GGThe Installation Wizard.

ATTENTION: if you use the reset button and relaunch the wizard, no data will be erased but your TV connection settings will be lost, and you will have to set them up again through the wizard.

SYSTEM RECOVERY

•If your ARCHOS does not respond correctly, or does not show certain songs or videos that you have copied to it, try using the “Repair and Formatting Tools” (see: System Settings).

•If using the “Repair and Formatting Tools” does not solve your problem, you can try a system recovery. It allows you to repair the hard drive, format it, etc.

 4GUVCTV[QWTFGXKEG FKUEQPPGEVVJGRQYGTCFCRVGTYCKVHQTUGEQPFUTGEQP- nect it).

2.The red indicator starts blinking, and after a few seconds, it will start blinking faster. While the red indicator is blinking faster, press the TV button on the re- mote control to access the Recovery mode.

If the image does not appear, press the TV button and wait for a few seconds. Repeat this operation until you can see the recovery screen (white back- ground).

While you are in recovery mode, use the navigation buttons of the remote control to move from one option to another and press OK to validate.