Archos 500973 user manual TV Settings, TV Connection, Resolution, Equalizer Screen

TV+ MANUAL V1.0 MAIN SETTINGS > P. 47

“Balance” (not available in HDMI output mode)

-allows you to balance the sound between the left and right stereo channels.

“Reset”

-resets the sound parameters to the default values.

“EQUALIZER” SCREEN

•Your ARCHOS features a 5-band equalizer.

•Select a band (Bass, Mid. bass, Mid. range, Mid. treble or Treble), then use the up/down arrows to change the gain level for these frequency ranges.

It is advised that you change these settings while listening to music, in order to be able to appreciate the sound changes.

7.2 “TV SETTINGS”

These settings could potentially make your screen go blank.You will need to select the “Apply change” button before anything happens. Read the on-screen messages VERY CAREFULLY so that you do not get stuck with a blank screen.

“TV Connection”

-select the type of video output (“Composite”, “S-Video”, “Component”, “RGB” or “HDMI”), based on how you have connected the ARCHOS to your TV.

“Resolution” *

-select the resolution that best adapts to your TV: “VGA 4/3 (640x480 60Hz)”, “480p 16/9 (720x480 60Hz)” or “576p 16/9 (720x576 50Hz)”.

* This parameter only appears if you choose the “HDMI” TV connection mode.