SNMP Settings
The Simple Network Management Protocol (SNMP) lets a network administrator monitor problems on a network by retrieving settings on remote network devices. The network administrator typically runs an SNMP management station program on a local host to obtain information from an SNMP agent such as the Netopia Gateway.
set snmp community read name
Adds the specified name to the list of communities associated with the Netopia Gateway. By default, the Netopia Gateway is associated with the public community.
set snmp community write name
Adds the specified name to the list of communities associated with the Netopia Gateway.
set snmp community trap name
Adds the specified name to the list of communities associated with the Netopia Gateway.
set snmp trap ip-traps ip-address
Identifies the destination for SNMP trap messages. The
set snmp sysgroup contact contact_info
Identifies the system contact, such as the name, phone number, beeper number, or email address of the person responsible for the Netopia Gateway. You can enter up to 255 char- acters for the contact_info argument. You must put the contact_info argument in
set snmp sysgroup location location_info
Identifies the location, such as the building, floor, or room number, of the Netopia Gateway. You can enter up to 255 characters for the location_info argument. You must put the location_info argument in
