Netopia 2200 manual Igmp Settings, Set igmp snooping off on, Set igmp robustness value

CONFIG Commands

rent dynamically-assigned IP address. This allows you to get to the IP address assigned to your Gateway, even though your actual IP address may change as a result of a PPPoE con- nection to the Internet.

set dynamic-dns option [ off dyndns.org ]

set dynamic-dns ddns-host-name myhostname.dyndns.org set dynamic-dns ddns-user-name myusername

set dynamic-dns ddns-user-password myuserpassword

Enables or disables dynamic DNS services. The default is off. If you specify dyndns.org, you must supply your hostname, username for the service, and password.

Because different dynamic DNS vendors use different proprietary protocols, currently only www.dyndns.org is supported.

IGMP Settings

These commands are supported beginning with Firmware Version 7.5.1.

set igmp snooping [ off on ]

Enables IGMP Snooping. See “IGMP (Internet Group Management Protocol)” on page 97 for detailed explanation.

set igmp robustness value

Sets IGMP robustness range: from 2 – 255. The default is 2. See “IGMP (Internet Group Management Protocol)” on page 97 for detailed explanation.

set igmp query-intvl value

Sets the query-interval range: from 10 seconds – 600 seconds, The default is 125 sec- onds. See “IGMP (Internet Group Management Protocol)” on page 97 for detailed explana- tion.

set igmp query-response-intvl value

Sets the query-response interval range: from 5 deci-seconds (tenths of a second) – 255 deci-seconds. The default is 100 deci-seconds. See “IGMP (Internet Group Management Protocol)” on page 97 for detailed explanation.

249