Syslog
set system syslog option [ off on ]
Enables or disables system syslog feature. If syslog option is on, the following commands are available:
set system syslog host-nameip [ ip_address hostname ]
Specifies the syslog server’s address either in dotted decimal format or as a DNS name up to 64 characters.
set system syslog
Sets the UNIX syslog Facility. Acceptable values are local0 through local7.
set system syslog
Specifies whether violations are logged or ignored.
set system syslog
Specifies whether acceptances are logged or ignored.
set system syslog log-attempts [ off on ]
Specifies whether connection attempts are logged or ignored.
Default syslog installation procedure
1.Access the router via telnet from the private LAN.
DHCP server is enabled on the LAN by default.
2.The product’s stateful inspection feature must be enabled in order to examine TCP, UDP and ICMP packets destined for the router or the private hosts.
This can be done by entering the CONFIG interface.
•Type config
•Type the command to enable stateful inspection
