Netopia 2200 manual LED Function Summary Matrix, 201

Status Indicator Lights

LED Function Summary Matrix

	Unlit	Solid Green	Flashing	Solid Red
			Green
Power	No power	Power on	N/A	System failure
USB Active	No signal	USB port con-	Activity on the	N/A
		nected to PC	USB cable
DSL Sync	No signal	DSL line synched	Attempting to	N/A
		with the DSLAM	train with DSLAM
DSL Traffic	No signal	N/A	Activity on the	N/A
			DSL cable
Ethernet	No signal	N/A	Activity on the	N/A
Traffic			Ethernet cable
Ethernet Link	No signal	Synched with Ether-	N/A	N/A
		net card
Internet	No signal	Broadband device	Activity on the	Physical link estab-
		is connected.	WAN port.	lished, but PPP or
				DHCP fails.

If a status indicator light does not look correct, look for these possible problems:

LED	State		Possible problems
		1.	Make sure the power switch is in the ON position.
		2.	Make sure the power adapter is plugged into the 2200- and 3300-series
Power	Unlit		DSL Gateway properly.
		3.	Try a known good wall outlet.
		4.	Replace the power supply and/or unit.
		1.	Make sure the you are using the correct cable. The DSL cable is the thin-
			ner standard telephone cable.
DSL		2.	Make sure the DSL cable is plugged into the correct wall jack.
	Unlit	3.	Make sure the DSL cable is plugged into the DSL port on the 2200- and
Sync			3300-series DSL Gateway.
		4.	Make sure the DSL line has been activated at the central office DSLAM.
		5.	Make sure the 2200- and 3300-series DSL Gateway is not plugged into
			a micro filter.

201