Netopia 2200 manual Pinhole Configuration Procedure. Use the following steps

Configure

Pinhole Configuration Procedure. Use the following steps:

1.From the Configure toolbar button -> Advanced link, select the Internal Servers link.

Since Port Forwarding is required for this example, the Netopia embedded Web server is configured first.

☛NOTE:

The two text boxes, Web (HTTP) Server Port and Telnet Server Port, on this page refer to the port numbers of the Netopia Gateway’s embedded admin- istration ports.

To pass Web traffic through to your LAN station(s), select a Web (HTTP) Port number that is greater than 1024. In this example, you choose 8100.

2.Type 8100 in the Web (HTTP) Server Port text box.

3.Click the Submit button.

4.Click Advanced. Select the Pinholes link to go to the Pinhole page.

79