Netopia 2200 manual Wireless MAC Authorization

Configure

Privacy modes available from the pull-down menu for the multiple SSIDs are: WPA-PSK, WPA-802.1x, or Off-No Privacy. WEP can also be selected on the additional SSIDs as long as it is not used on the primary SSID. WEP can only be used on one SSID, so any oth- ers will not have WEP available.

These additional Wireless IDs are “Closed System Mode” Wireless IDs that will not be shown by a client scan, and therefore must be manually configured at the client. In addi- tion, wireless bridging between clients is disabled for all members of these additional net- work IDs.

Click the Submit button.

After your first entry, the Alert icon will appear in the upper right corner of your screen. When you are finished adding SSIDs, click the Alert icon, and Save your changes and restart the Gateway.

Wireless MAC Authorization

Wireless MAC Authorization allows you to specify which client PCs are allowed to join the wireless LAN by specific hardware address. Once it is enabled, only entered MAC addresses that have been set to Allow will be accepted onto the wireless LAN. All unlisted addresses will be blocked, in addition to the listed addresses with Allow disabled.

63