Netopia 2200 manual Link Snmp

Configure

Link: SNMP

When you click the SNMP link, the SNMP configuration page appears.

The Simple Network Management Protocol (SNMP) lets a network administrator monitor problems on a network by retrieving settings on remote network devices. The network administrator typically runs an SNMP management station program on a local host to obtain information from an SNMP agent. In this case, the Netopia Gateway is an SNMP agent. Your Gateway supports SNMP-V1, with the exception of most sets (read-only and traps), and SNMP-V2. (For certain parts of the NPAV2TRAP.MIB – parameters under resNat- Params, resDslParams, resSecParams – set is supported.)

You enter SNMP configuration information on this page. Your network administrator fur- nishes the SNMP parameters.

95