Netopia 2200 manual 292

set wireless multi-ssid second-ssid-privacy { off WEP WPA-PSK WPA-802.1x }

set wireless multi-ssid third-ssid-privacy { off WEP WPA-PSK WPA-802.1x }

set wireless multi-ssidfourth-ssid-privacy { off WEP WPA-PSK WPA-802.1x }

Specifies the type of privacy enabled on multiple SSIDs when multi-ssid option is set to on. off = no privacy; WEP = WEP encryption; WPA-PSK = Wireless Protected Access/Pre- Shared Key; WPA-802.1x = Wireless Protected Access/802.1x authentication. See “Wire- less Privacy Settings” on page 293 for more information.

☛NOTE:

WEP is supported on only one SSID at a time, and should not be available if another SSID already has it configured.

set wireless multi-ssid second-ssid-wpa-ver { all WPA1-only WPA2-only }

set wireless multi-ssid third-ssid-wpa-ver { all WPA1-only WPA2-only }

set wireless multi-ssid fourth-ssid-wpa-ver { all WPA1-only WPA2-only }

Specifies the type of WPA version enabled on multiple SSIDs when multi-ssid option is set to on and privacy is set tp WPA-PSK. See “Wireless Privacy Settings” on page 293 for more information.

set wireless multi-ssid second-ssid-weplen [ 40/64bit 128bit 256bit ] set wireless multi-ssid third-ssid-weplen [ 40/64bit 128bit 256bit ] set wireless multi-ssid fourth-ssid-weplen [ 40/64bit 128bit 256bit ]

Specifies the WEP key length for the multiple SSIDs, when second-, third-, or fourth- ssid-privacyis set to WEP. 40bit encryption is equivalent to 64bit encryption. The longer the key, the stronger the encryption and the more difficult it is to break the encryption.

292