3.Be sure that you have SafeHarbour VPN enabled.
SafeHarbour is a keyed feature. See “Install Keys” on page 184. for information con- cerning installing Netopia Software Feature Keys.
4.Check the Enable SafeHarbour IPSec checkbox.
Checking this box will automatically display the SafeHarbour IPSec Tunnel Entry parameters.
Enter the initial group of tunnel parameters. Refer to your Setup Worksheet and the
“Parameter Descriptions” on page 136 as required.
5.Enter the tunnel Name.
This is the only parameter that does not have to match the peer/remote VPN device.
6.Enter the Peer External IP Address.
7.Select the Encryption Protocol from the
8.Select the Authentication Protocol from the
9.Click Add.
The Tunnel Details page appears.
