Netopia 2200 Set wireless mode both-b-and-g b-only g-only, Set wireless multi-ssid option on off

CONFIG Commands

set wireless mode { both-b-and-g b-only g-only }

Beginning with Netopia Firmware Version 7.5.1. specifies the wireless operating mode for connecting wireless clients: both-b-and-g, b-only, or g-only, and locks the Gateway in that mode.

☛NOTE:

If you choose to limit the operating mode to B or G only, clients using the mode you excluded will not be able to connect.

set wireless multi-ssid option { on off }

Beginning with Netopia Firmware Version 7.5.1. enables or disables the multi-ssidfeature which allows you to add additional network identifiers (SSIDs or Network Names) for your wireless network. When enabled, you can specify up to three additional SSIDs with sepa- rate privacy settings for each. See below.

set wireless multi-ssid {second-ssid third-ssid fourth-ssid } name

Specifies a descriptive name for each SSID. when multi-ssid option is set to on.

291