CONFIG Commands

set ppp module [vccn] mru integer

Specifies the Maximum Receive Unit (MRU) for the PPP interface. The integer argument can be any number between 128 and 1492 for PPPoE; 1500 otherwise.

set ppp module [vccn] magic-number { on off }

Enables or disables LCP magic number negotiation.

set ppp module [vccn] protocol-compression { on off }

Specifies whether you want the Netopia Gateway to compress the PPP Protocol field when it transmits datagrams over the PPP link.

set ppp module [vccn] lcp-echo-requests { on off }

Specifies whether you want your Netopia Gateway to send LCP echo requests. You should turn off LCP echoing if you do not want the Netopia Gateway to drop a PPP link to a nonre- sponsive peer.

set ppp module [vccn] echo-period integer

Specifies the number of seconds the Netopia Gateway should wait before sending another echo from an LCP echo request. The integer argument can be any number from between 5 and 300 (seconds).

set ppp module [vccn] lost-echoes-max integer

Specifies the maximum number of lost echoes the Netopia Gateway should tolerate before bringing down the PPP connection. The integer argument can be any number from between 1 and 20.

set ppp module [vccn] failures-max integer

Specifies the maximum number of Configure-NAK messages the PPP module can send without having sent a Configure-ACK message. The integer argument can be any number between 1 and 20.

265

Page 265
Image 265
Netopia 2200 manual Set ppp module vccn mru integer, Set ppp module vccn magic-number on off