Netopia 2200 manual Starting and Ending a CLI Session, Logging, 224

	Command Utilities
top	Go to top level of configuration mode
quit	Exit from configuration mode; return to shell mode
exit	Exit from configuration mode; return to shell mode

Starting and Ending a CLI Session

Open a telnet connection from a workstation on your network.

You initiate a telnet connection by issuing the following command from an IP host that sup- ports telnet, for example, a personal computer running a telnet application such as NCSA Telnet.

telnet <ip_address>

You must know the IP address of the Netopia Gateway before you can make a telnet con- nection to it. By default, your Netopia Gateway uses 192.168.1.254 as the IP address for its LAN interface. You can use a Web browser to configure the Netopia Gateway IP address.

Logging In

The command line interface log-in process emulates the log-in process for a UNIX host. To logon, enter the username (either admin or user), and your password.

•Entering the administrator password lets you display and update all Netopia Gateway settings.

•Entering a user password lets you display (but not update) Netopia Gateway settings.

When you have logged in successfully, the command line interface lists the username and the security level associated with the password you entered in the diagnostic log.

Ending a CLI Session

You end a command line interface session by typing quit from the SHELL node of the command line interface hierarchy.

224