Netopia 2200 manual 169, Viewing filters

Working with IP Filters and Filter Sets

If Protocol Type is set to TCP or UDP, the settings for port comparison will appear. These settings only take effect if the Protocol Type is TCP or UDP.

9.From the Source Port Compare pull-down menu, choose a comparison method for the filter to use on a packet’s source port number.

Then select Source Port and enter the actual source port number to match on (see the table on page 158).

10.From the Destination Port Compare pull-down menu, choose a compari- son method for the filter to use on a packet’s destination port number.

Then select Destination Port and enter the actual destination port number to match on (see the table on page 158).

11.When you are finished configuring the filter, click the Submit button to save the filter in the filter set.

Viewing filters

To display the table of input or output filters, select the Filter Set Name in the Filter Set page and click the Add or Edit button.

The table of filters in the filtersets appears.

169