Netopia 2200 manual Delete ip static-routes destination-network netaddress, 261

CONFIG Commands

set ip static-routes destination-network net_address interface { ip-address ppp-vccn }

Specifies the interface through which the static route is accessible.

set ip static-routes destination-network net_address gateway-address gate_address

Specifies the IP address of the Gateway for the static route. The default Gateway must be located on a network connected to the Netopia Gateway configured interface.

set ip static-routes destination-network net_address metric integer

Specifies the metric (hop count) for the static route. The default metric is 1. Enter a num- ber from 1 to 15 for the integer argument to indicate the number of routers (actual or best guess) a packet must traverse to reach the remote network.

You can enter a metric of 1 to indicate either:

•The remote network is one router away and the static route is the best way to reach it;

•The remote network is more than one router away but the static route should not be replaced by a dynamic route, even if the dynamic route is more efficient.

set ip static-routes destination-network net_address rip-advertise [ SplitHorizon Always Never ]

Specifies whether the gateway should use Routing Information Protocol (RIP) broadcasts to advertise to other routers on your network and which mode to use. The default is SplitHo- rizon.

delete ip static-routes destination-network net_address

Deletes a static route. Deleting a static route removes all information associated with that route.

261