91
Configure
• Quality of Service (QoS) – This is the Quality of Service setting for the flow, based
on the TOS bit information. Select Expedite, Assure, or Off (default) from the pull-down
menu. The following table outlines the TOS bit settings and behavior:
QoS Setting TOS Bit Value Behavior
Off TOS=000 This custom flow is disabled. You can activate
it by selecting one of the two settings below.
This setting allows you to pre-define flows with-
out actually activating them.
Assure TOS=001 Use normal queuing and throughput rules, but
do not drop packets if possible. Appropriate
for applications with no guaranteed delivery
mechanism.
Expedite TOS=101 Use minimum delay. Appropriate for VoIP and
video applications.