Link: Packet Filter
When you click the Packet Filter link the Filter Sets screen appears.
Security should be a high priority for anyone administering a network connected to the Internet. Using packet filters to control network communications can greatly improve your network’s security. The Packet Filter engine allows creation of a maximum of eight Filter Sets. Each Filter Set can consist of many rules. There can be a maximum of 32 filter rules in the system.
☛WARNING:
Before attempting to configure filters and filter sets, please read and under- stand this entire section thoroughly. Netopia Gateways incorporating NAT have advanced security features built in. Improperly adding filters and filter sets increases the possibility of loss of communication with the Gateway and the Internet. Never attempt to configure filters unless you are local to the Gate- way.
Although using filter sets can enhance network security, there are disadvan- tages:
•Filters are complex. Combining them in filter sets introduces subtle interac- tions, increasing the likelihood of implementation errors.
•Enabling a large number of filters can have a negative impact on perfor- mance. Processing of packets will take longer if they have to go through many checkpoints in addition to NAT.
•Too much reliance on packet filters can cause too little reliance on other security methods. Filter sets are not a substitute for password protection, effective safeguarding of passwords, and general awareness of how your net- work may be vulnerable.
Netopia Firmware Version 7.6’s packet filters are designed to provide security for the Inter- net connections made to and from your network. You can customize the Gateway’s filter sets for a variety of packet filtering applications. Typically, you use filters to selectively
