IPMaps Settings

set ip-maps name <name> internal-ip <ip address>

Specifies the name and static ip address of the LAN device to be mapped.

set ip-maps name <name> external-ip <ip address>

Specifies the name and static ip address of the WAN device to be mapped.

Up to 8 mapped static IP addresses are supported.

Network Address Translation (NAT) Default Settings

NAT default settings let you specify whether you want your Netopia Gateway to forward NAT traffic to a default server when it doesn’t know what else to do with it. The NAT default host function is useful in situations where you cannot create a specific NAT pinhole for a traffic stream because you cannot anticipate what port number an application might use. For example, some network games select arbitrary port numbers when a connection is being opened. By identifying your computer (or another host on your network) as a NAT default server, you can specify that NAT traffic that would otherwise be discarded by the Netopia Gateway should be directed to a specific hosts.

set nat-default mode [ off default-server ip-passthrough ]

Specifies whether you want your Netopia Gateway to forward unsolicited traffic from the WAN to a default server or an IP passthrough host when it doesn’t know what else to do with it. See “Default Server” on page 85 for more information.

set nat-default dhcp-enable [ on off ]

Allows the IP passthrough host to acquire its IP address via DHCP, if ip-passthroughis enabled.

set nat-default address ip_address

Specifies the IP address of the NAT default server.

262

Page 262
Image 262
Netopia 2200 manual IPMaps Settings, Network Address Translation NAT Default Settings