Netopia 2200 manual 289, Set security state-insp eth B option on

CONFIG Commands

set security state-insp eth B option on

•Type the command to enable the router to drop fragmented packets set security state-insp eth B deny-fragments on

3.Enabling syslog:

•Type config

•Type the command to enable syslog

set system syslog option on

•Set the IP Address of the syslog host

set system syslog host-nameip <ip-addr>

(example: set system syslog host-nameip 10.3.1.1)

•Enable/change the options you require

set system syslog log-facility local1 set system syslog log-violations on set system syslog log-accepted on set system syslog log-attempts on

4.Set NTP parameters

•Type config

•Set the time-zone – Default is 0 or GMT

set system ntp time-zone <zone>

(example: set system ntp time-zone –8)

• Set NTP server-address if necessary (default is 204.152.184.72)

set system ntp server-address <ip-addr>

(example:

set system ntp server-address 204.152.184.73)

• Set alternate server address

set system ntp alt-server-address <ip-addr>

5.Type the command to save the configuration

•Type save

•Exit the configuration interface by typing

exit

•Restart the router by typing restart

The router will reboot with the new configuration in effect.

289