![](/images/new-backgrounds/1263750/263750205x1.webp)
Configure
Configuring for Bridge Mode
1.Browse into the Netopia Gateway’s web interface.
2.Click on the Configure button in the upper Menu bar.
3.Click on the LAN link.
The LAN page appears.
4.In the box titled LAN IP Inter- face (Ethernet 100BT):
Make note of the Ethernet IP Address and subnet mask.
You can use this address to access the router in the future.
5.Click on the Advanced link in the left- hand links toolbar.
6.Under the heading of Services, click on the Ethernet Bridge link.