Netopia 2200 manual Set system zerotouch option on off, 287

CONFIG Commands

set system ntp option [ off on ]:

server-address (204.152.184.72) alt-server-address (18.72.0.3): time-zone [ -12 - 12 ] update-period (60) [ 1 - 65535 ]: daylight-savings [ off on ]

Specifies the NTP server address, time zone, and how often the Gateway should check the time from the NTP server. NTP time-zone of 0 is GMT time; options are -12 through 12 (+/- 1 hour increments from GMT time). update-periodspecifies how often, in minutes, the Gateway should update the clock. daylight-savingsspecifies whether daylight savings time is in effect; it defaults to off.

set system zerotouch option [ on off ]

Enables or disables the Zero Touch option.

Zero Touch refers to automatic configuration of your Netopia Gateway. The Netopia Gate- way has default settings such that initial connection to the Internet will succeed. If the zerotouch option is set to on, HTTP requests to any destination IP address except the IP address(es) of the configured redirection URL(s) will access a redirection server. DNS traf- fic will not be blocked. Other traffic from the LAN to all destinations will be dropped.

set system zerotouch redirect-url redirection-URL

Specifies the URL(s) of the desired redirection server(s) when the zerotouch option is set to on. URLs may be a maximum of 192 characters long, and may be in any of the following forms:

http://<domain-name OR IP address>/optionalPath:port http://<domain-name OR IP address>/optionalPath https://<domain-name OR IP address>/optionalPath:port https://<domain-name OR IP address>/optionalPath <domain-name OR IP address>/optionalPath:port <domain-name OR IP address>/optionalPath

If the port number is omitted, port 80 will be assumed. Save and Restart are required to enforce these commands.

287