STH-380PO/370PO/370PI/360PO

Pendant Type Installation

Camera Wiring Diagram

This wiring diagram indicates the connection between the interface board and external equipment. For wiring Samsung Techwin’s Speed Dome Camera and the accessories, please refer to the Speed Dome Camera user’s manual.

Video Output

Pendant Type Installation

7. Preparing Camera

Once the camera wiring is successful, prepare the camera. Every housing-typed camera except the flush model is provided with a dome cover first detach the dome cover from the camera.

STH-380PO/370PO/370PI/360PO

Fan Heater

Connector

Communications and AUX

Alarm

Power Supply

Alarm Output

Alarm Input

8. Setting Up Camera DIP Switches DIP switches for communication and ID protocols are located on the bottom of the camera. For the switch settings, refer to the appendix of this manual.

ID(SW1)

Protocol(SW2)

9.Connecting Camera Safety Cable and Attaching Camera

Carefully attach the camera to the mount following the alignment guide marks as shown in the picture. First hook the camera's safety cable on the mount, and then attach the camera. The safety cable is coiled inside the install base. As shown in the leftward picture, pull out the safety cable from the install base and then hook it to the mount.

Refer to the below Control Signal Connection diagram

AC24V 2.5A

Power Input

Ground

AUX Output

 

Alignment

Safety

Direction

Guides

Cable

 

 

Alignment

 

Direction

 

Guides

Control Signal Connection

· RS485 Communications

Controller

Camera

or DVR

 

D+

TXD+

D-

TXD-

· RS422 Communications

Controller

Camera

or DVR

 

D+

TXD+

D-

TXD-

TX+

RXD+

TX-

RXD-

Notes

• The maximum capacity of the alarm and AUX output terminals is DC30V 2A.

• Connecting the power connector and GND incorrectly to the NC/NO and COM ports can cause a short circuit which may lead to fire and damage the camera.

Alignment

Directions

To attach the camera to the mount, refer to the alignment guide marks as shown in the picture.

Notes

• Make sure to first hook the camera's safety cable to the mount before proceeding. Otherwise you may be exposed to serious injury caused by a fallen camera.

12 SPEED DOME CAMERA ACCESSORIES

SPEED DOME CAMERA ACCESSORIES 13

Page 7
Image 7
Samsung SPD-3700T Camera Wiring Diagram, Preparing Camera, Connecting Camera Safety Cable and Attaching Camera