Samsung SPD-3700T Assembling Housing and Bracket, Securing Housing, Wiring Terminal Cables

Pendant Type Installation

STH-
380PO/370PO/370PI/360PO	Fan Heater Adaptor
	(STH-380PO Only)
	Fan Heater Connector
	(Model: STH-370PO)
	Camera Adaptor

Notes

• The STH-380 housing’s fan heater connector must be connected to its dedicated adapter enclosed with the product.

• Make sure to hook the safety cable on the bracket loop before connecting the housing. • Neglecting this caution may expose you to injury caused by a fallen housing.

4.Assembling Housing and Bracket

After hooking the safety cable, fit the housing into the fixture grooves on the bracket as shown in the picture. When attaching, locate the "Samsung" logo on the housing facing the center front.

Logo

Pendant Type Installation

5. Securing Housing

Check if the housing is properly attached to the bracket, secure the housing to the bracket with the enclosed screws.

6. Wiring Terminal Cables

Connect the cables to the terminal block on the hinged door. Once the wiring is successful, close the hinged door.

✽ For the location of the wiring pins, please refer to the “Camera Wiring Diagram” on the next page.

STH-380PO/370PO/370PI/360PO

10 SPEED DOME CAMERA ACCESSORIES SPEED DOME CAMERA ACCESSORIES 11