Samsung SPD-3700T Preparing Pipe and Ceiling Bracket, Assembling STB-30PF and Pipe

STH-380PO/370PO/370PI/360PO

Pendant Type Installation

Camera Adaptor

Fan Heater Adaptor

(STH-380PO Only)

Sealing Tape

SPSS32A/SCH40 Size Pipe

STB-30PF

PF 1 1/4"

1.Preparing Pipe and Ceiling Bracket

STB-30PF requires a SPSS32A/SCH40-sized pipe as shown in the picture. Assemble the screw taps, and then wind a sealing tape around the screw barrel to prevent water leakage. Please note that the STH-380PO housing requires an additional installation of the fan heater adapter enclosed with the product.

Notes

• Using unsealed screw taps can cause the product to fall down or allow water leakage that may lead to fire or damage the product. Sealing tape is not enclosed with the product, and needs to be purchased at your expense.

2.Assembling STB-30PF and Pipe

After sealing the screw taps, assemble the STP-30PF flange securely to the pipe.

Notes

• Do not connect the camera to a power outlet until the installation is complete. Supplying power in the middle of the installation may cause fire or damage the product.

✽For the next installation procedures, refer to the “Wall Type Housing” installation from step 2.

Pendant Type Installation

■3.3 Indoor Flange Mount Type Installation

This guideline is based on the installation of the indoor flange STB-25PF and the ceiling exposed mount STB-370PC.

STB-370PC

STB-30PF

STB-25PF

STB-496PPV

STB-30PF

STH-380PO/370PO/370PI/360PO

16 SPEED DOME CAMERA ACCESSORIES SPEED DOME CAMERA ACCESSORIES 17