Pendant Type Installation
6.Attaching Camera
Carefully attach the camera to the mount following the alignment guide marks as shown in the picture. First hook the camera's safety cable on the mount, and then attach the camera. The safety cable is coiled inside the install base. As shown in the leftward picture, pull out the safety cable from the install base and then hook it to the mount.
| Alignment |
| Direction |
Safety | Guides |
Cable |
|
| Alignment |
| Direction |
| Guides |
Alignment
Directions
✽To attach the camera to the mount, refer to the alignment guide marks as shown in the picture.
Notes
• Make sure to first hook the camera's safety cable to the mount before proceeding. Otherwise you may be exposed to serious injury caused by a fallen camera.
✽To attach or detach the camera, refer to the picture.
*Attaching the camera: Hold up the camera and push it to the mount as shown in the picture. Push the camera until you hear a “click”.
*Detaching the camera: To detach the camera, pull the camera downward while pushing
the unlock buttons on the camera upward.
Unlock Button
UNLOCK
To attach the camera To detach the camera
On-Ceiling Mount Type Installation
■4. On-Ceiling Mount Type Installation
This guideline is based on the installation of the indoor flange
20 SPEED DOME CAMERA ACCESSORIES | SPEED DOME CAMERA ACCESSORIES 21 |
