CONNECTIONS
CONNECTING THE AC ADAPTER
This AC adapter operates on AC
1.Connect the AC adapter a wall outlet.
2.Press the 
/ON button to turn on the unit.
3.Use the 
or 
button to select NO, then press ENTER button. (Only apply to the first time POWER ON.)
4.Press the FUNCTION button repeatedly to select TV / AV IN mode, then press ENTER button.
To AC Wall Outlet
AC Adapter
To DC
IN 12V
NOTES
•The included AC adapter is for use with this unit only. Do not use them with other equipment.
•When the AC adapter is plugged in, the unit is not completely disconnected from the main, even when the power is turned off.
•Be sure the AC adapter is disconnected and all functions are off before making connections.
•Make sure that all the components are connected correctly.
•When you are not going to use the unit for a long period of time, disconnect the AC adapter.
INSTALLATION
REMOVING THE BASE STAND
WARNING: The LCD display is very fragile, and must be protected at all times when removing the base stand. Be sure that no hard or sharp objects, or anything that could scratch or damage the LCD display, come in contact with it. Do NOT place pressure on the rear of the unit at anytime because the screen could crack.
1. Disconnect any cables or cords connected to the unit.
2.Remove the rear cover.
3.Lay the unit down on a flat surface, so the back side is facing up, making sure to place a soft cushioned material (such as a pillow or thick piece of foam) beneath the screen.
4.Remove the 4 screws and then remove the BASE STAND from the unit.
MOUNTING ON THE WALL
This unit is
NOTE
Remove the base stand before mounting the unit on the wall.
WALL MOUNTING HOLES : 35 X 75 MM
WALL MOUNTING HOLES : 35 X 75 MM |
E 8
