Audiovox PLV16081 instruction manual Troubleshooting Guide, Symptom Cause and Remedy

TROUBLESHOOTING GUIDE

SYMPTOM		CAUSE (AND REMEDY)
No power.	•	Check that the AC power adapter is connected.
	• The unit is not turned on.
The remote does not	•	Remove any obstacles between the remote and the unit.
function.	•	Use the remote near the unit.
	• Point the remote at the remote sensor on the unit.
	• Replace the batteries in the remote with new ones.
Bad Picture (snow,	•	Check the location of the antenna and adjust it if necessary.
multipe images,	•	Make sure the antenna cable is firmly connected.
distortion, blurry)	•	Make sure all input cables are firmly connected.
Black and white picture.	•	Check the Picturing setting within the TV SETUP MENU.
	•	Check to make sure the program you are watching is broadcast in
		Color and not Black & White.
No picture or sound.	•	Make sure the unit is plugged in and turned on.
	• Make sure that TV mode is selected.
	• Try a new channel to check for possible station trouble.
	• Make sure the antenna is connected properly.
	•	Increase the volume.
	• Make sure the antenna or audio video source device is working properly.
	• Make sure all cables are firmly connected.
	• Check for local interference.
Colored patches of	•	Make sure there are no unshielded electrical devices nearby that are
picture.		causing interference.
	• Turn the unit off for 30 minutes, then try it again.

E 14