Gefen GTV-DIGAUD-2-AAUD user manual Connecting Digital Audio to Analog Adapter

CONNECTING THE

DIGITAL AUDIO TO ANALOG ADAPTER

How to Connect the Digital Audio to Analog Adapter

1.Connect an Optical and/or Coax cable from the audio source(s) to the Digital Audio to Analog Adapter.

IMPORTANT: Before connecting the included optical cable between the audio source and the Digital Audio to Analog Adapter, be sure to remove the clear plastic protective cover on both end of the TOSLINK™ connectors as shown in the photos below. Use your thumb and index finger to pinch the protective cover, then gently pull to remove the cover from the TOSLINK™ connector.

2.Connect a set of L/R analog RCA-type audio cables from the Audio L/R output of the Digital Audio to Analog Adapter to the inputs of the A/V equipment.

3. Connect the included 5V DC power supply to the power receptacle on the Digital Audio to Analog Adapter and connect the AC adapter to an available electrical outlet

Wiring Diagram for the Digital Audio to Analog Adapter

L/R RCA ANALOG AUDIO CABLE

SPDIF OR TOSLINK DIGITAL AUDIO CABLE

Audio Source

Converter

Audio Receiver

GTV-DIGAUD-2-AAUD

6