1.WAN: Data link

activated at <Rate> Kbps (rx/tx)

DSL Log Messages (most common):

This log message is generated when the DSL link comes up.

2.WAN: Data link

This log message is generated when the DSL link goes down.

deactivated

 

3. RFC1483 up

This log message is generated when RFC1483 link comes up.

4.RFC1483-<WAN-This log message is generated when RFC1483 link goes down. instance>: IP down

5.PPP: Channel <ID> This log message is generated when a PPP channel comes up. up Dialout Profile

name: <Profile Name>

6. PPP-<WAN

This log message is generated when a PPP channel goes down. The

Instance> down:

reason for the channel going down is displayed as well.

<Reason>

 

Access-related Log Messages

1.permitted: This log-message is generated whenever a packet is allowed to traverse router-interfaces or allowed to access the router itself.

2.attempt:This log-message is generated whenever a packet attempts to traverse router-interfaces or attempts to access the router itself.

3.dropped - violation This log-message is generated whenever a packet, traversing the

of security policy: router or destined to the router itself, is dropped by the firewall

because it violates the expected conditions.

4.dropped - invalid This log-message is generated whenever a packet, traversing the

checksum:router or destined to the router itself, is dropped because of invalid IP

checksum.

5.dropped - invalid This log-message is generated whenever a packet, traversing the

data length:router or destined to the router itself, is dropped because the IP length

is greater than the received packet length or if the length is too small for an IP packet.

114

Page 114
Image 114
Netopia 2200 manual 114, DSL Log Messages most common, Access-related Log Messages