Netopia 2200 manual Ple static

IPMap will support statically assigned WAN IP addresses from the

The IPMaps feature allows multi-

WAN IP addresses to be assigned to the Netopia Gateway.

What are IPMaps and how are they used?

Configure

Configure the IPMaps Feature

FAQs for the IPMaps Feature

Before configuring an example of an IPMaps-enabled network, review these frequently asked questions.

ple static

Static WAN IP addresses are used to support specific services, like a web server, mail server, or DNS server. This is accomplished by mapping a separate static WAN IP address to a specific internal LAN IP address. All traffic arriving at the Gateway intended for the static IP address is transferred to the internal device. All outbound traffic from the internal device appears to originate from the static IP address.

Locally hosted servers are supported by a public IP address while LAN users behind the NAT-enabled IP address are protected.

IPMaps is compatible with the use of NAT, with either a statically assigned IP address or DHCP/PPP served IP address for the NAT table.

What types of servers are supported by IPMaps? IPMaps allows a Netopia Gateway to support servers behind the Gateway, for example, web, mail, FTP, or DNS serv- ers. VPN servers are not supported at this time.

Can I use IPMaps with my PPPoE or PPPoA connection? Yes. IPMaps

can be assigned to the WAN interface provided they are on the same subnet. Service providers will need to ensure proper routing to all IP addresses assigned to your WAN inter- face.

Will IPMaps allow IP addresses from different subnets to be assigned to my Gateway?

same subnet.

WAN IP addresses from different subnets are not supported.

83