Link: System Log: Entire
The system log shows the state of the WAN connection as well as the PPPoE session. Ver- ify that the PPPoE session has been correctly established and there are no failures. If there are error messages, go to the WAN configuration and verify the settings. The follow- ing is an example of a successful connection:
Message Log: |
|
00:00:00:00 L3 | KS: Using configured options found in flash |
00:00:00:00 L3 | BOOT: Warm start v7.3r0 |
00:00:00:00 L3 | IP address server initialization complete |
00:00:00:00 L4 | BR: Using saved configuration options |
00:00:00:00 L4 | BR: Netopia SOC OS version 7.3.0 (build r0) |
00:00:00:00 L4 | BR: |
00:00:00:00 L4 | BR: last install status: Firmware installed successfully |
00:00:00:00 L4 | BR: memory sizes - 2048K Flash, 8192K RAM |
00:00:00:00 L3 | BR: Starting kernel |
00:00:00:00 L3 | AAL5: initializing service |
00:00:00:00 L4 | ATM: Waiting for PHY layer to come up |
00:00:00:00 L3 | POE: Initializing PPP over Ethernet service |
00:00:00:00 L4 | POE: Binding to Ethernet (ether/vcc1) |
00:00:00:00 L3 | BRDG: Configuring port |
00:00:00:00 L3 | BRDG: Bridge not enabled for WAN. |
00:00:00:00 L3 | BRDG: Bridging from one WAN port to another is disabled |
00:00:00:00 L3 | BRDG: Initialization complete |
00:00:00:00 L4 | IP: Routing between WAN ports is disabled |
00:00:00:00 L4 | IP: IPSec client pass through is enabled |
00:00:00:00 L4 | IP: Address mapping enabled on interface PPP over Ethernet vcc1 |
00:00:00:00 L3 | IP: Adding default gateway over PPP over Ethernet vcc1 |
00:00:00:00 L3 | IP: Initialization complete |
00:00:00:00 L3 | IPSec: initializing service |
00:00:00:00 L3 | IPSec: No feature key available - service disabled |
00:00:00:00 L3 | PPP: PPP over Ethernet vcc1 binding to PPPoE |
00:00:00:00 L3 | PPP: PPP over Ethernet vcc1 Port listening for incoming PPP connection requests |
. |
|
. |
|
. |
|
00:00:00:24 L4 | |
00:00:00:25 L3 | |
00:00:00:25 L3 | |
00:00:00:25 L3 | |
00:00:00:25 L3 | |
00:00:00:25 L3 | lcp: LCP Send |
00:00:00:25 L3 | MAGIC 0x2dee0000+ |
00:00:00:25 L3 | lcp: LCP Recv |
00:00:00:25 L3 | MRU(1492) (ACK) AUTHTYPE(c223) (CHAP) (ACK) MAGICNUMBER |
00:00:00:25 L3 | (4403604) (ACK) |
00:00:00:25 L3 | lcp: returning |
00:00:00:25 L3 | chap: received challenge, id 1 |
00:00:00:25 L3 | chap: received success, id 1 |
00:00:00:25 L3 | ipcp: IPCP |
00:00:00:25 L3 | ADDR(0x0) DNS(0x0) DNS2(0x0) WINS(0x0) WINS2(0x0) |
00:00:00:25 L3 | ipcp: IPCP Recv |
00:00:00:25 L3 | ADDR(143.137.199.254) (ACK) |
00:00:00:25 L3 | ipcp: returning |
00:00:00:25 L3 | ipcp: IPCP |
00:00:00:25 L3 | ADDR(0x0) DNS(0x0) DNS2(0x0) |
00:00:00:25 L3 | ipcp: IPCP |
00:00:00:25 L3 | ADDR(0x8f89c702) DNS(0x8f89320a) DNS2(0x8f898909) |
00:00:00:25 L3 | ipcp: negotiated remote IP address 143.137.199.254 |
00:00:00:25 L3 | ipcp: negotiated IP address 143.137.199.2 |
00:00:00:25 L3 | ipcp: negotiated TCP hdr compression off |
00:00:00:27 L3 | NTP: Update system date & time |
7/16/03 01:55:31 PM L4 | TS: "admin" logging in on serial port 0 | |||||
7/16/03 | 01:55:33 PM | L4 | TS: "Admin" | completed | login: Full | Read/Write access |
7/16/03 | 01:55:33 PM | L4 | TS: "Admin" | completed | login: Full | Read/Write access |
