Netopia 2200 manual Set radius radius-port portnumber, Set vlan name string, 297

CONFIG Commands

set radius radius-port port_number

Specifies the port on which the RADIUS server is listening. The default value is 1812.

VLAN Settings

These settings are supported beginning with Firmware Version 7.4.2.

You can create up to 32 VLANs, and you can also restrict any VLAN, and the computers on it, from administering the Gateway. See “VLAN” on page 106 for more information.

set vlan name string

Sets the descriptive name for the VLAN. If no name is specified, displays a selection list of node names to select for editing.

Once a new VLAN name is specified, presents the list of VLAN characteristics to define:

•id – numerical range of possible IDs is 1 - 4095

•type [ by-port] – currently the only selection is by-port

•admin-restricted[ off on ] – default is off. If you select on, administrative access to the Gateway is blocked from this VLAN.

•port – VLAN’s physical port or wireless SSID.

You must save the changes, exit out of configuration mode, and restart the Gateway for the changes to take effect.

Example:

•Navigate to the VLAN item:

Netopia-3000/9459252 (top)>> vlan Netopia-3000/9459252 (vlan)>> set

vlan name

(name) node list ...

Select (name) node to modify from list, or enter new (name) to create.

name (?): vlan1

(vlan1) has been added to the (name) list "vlan1"

297