Samsung GH68-11254A Turn headset on/off, Make calls, Wear the headset, Adjust the volume

Features and Functions Guide

SAMSUNG

BluetoothMono Headset

WEP200

Important:

Be sure to first follow the Quick Start Guide on

the reverse side of this guide to complete initial setup

of your headset.

Headquarters:

1301 East Lookout Drive Suite 150

Richardson, TX 75082

Internet Address:

http://www.samsungmobileusa.com/ accessories

Customer Care Center:

1-888-987-4357

Turn headset on/off

To turn the headset on,

Press and hold the Multi-Function button for

4 seconds until you see 4 blue flashes on the indicator light, then release.

You will hear a tone and see the indicator light flashes while the power is on

(see Meaning of the indicator light of this guide).

To turn the headset off,

Press and hold the Multi-Function button for

4 seconds until you see 2 blue flashes on the indicator light, then release.

You will hear series of 2 tones and see the indicator light stops flashing.

Make calls

Making a voice activated call

If the phone’s voice recognition feature is on, you can make a voice activated call.

Press the Multi-Function button once. You will hear the voice-activation tone.

Say the name of the person you wish to call. Depending on your phone, this feature may not be supported.

Redialing the last number

If the phone’s voice recognition feature is off, press and hold the Multi-Function button for 2 seconds, twice.

If the phone’s voice recognition feature is on,

1Press the Multi-Function button and listen for the voice-activation tone. When you hear it, press the button again to cancel the feature.

Wear the headset

Wear the headset on your ear.

In general, you will get better performance when there are no obstructions (including parts of your body)

between the headset and the phone.

2Press and hold the Multi-Function button to access the recent call list.

3Press and hold the Multi-Function button to make a call to the last number you have dialed or received.

End a call

Press the Multi-Function button once.

Answer a call

•After you hear the ring tone, press the Multi-Function button once.

•If you answer the call with your phone, you can transfer the call to the headset by pressing the Multi-Function button.

Reject a call

When you receive a call, press and hold the Multi-Function button for 2 seconds to reject the call. Depending on your phone's setting or type, you may only be able to mute the ringer or this feature may not be supported.

Change for use on other ear

Depending on which ear you are going to wear the headset, simply adjust the hook accordingly.

￿Left￿Right

Adjust the volume

Press [￿] on the side of the headset to increase the volume level and press [￿] to decrease the volume level.

Use enhanced features

Enhanced features are available for phones that support the hands-free Bluetooth profile and enhanced features.

•Answer a second call (switching between 2 calls)

When your phone notifies you of another incoming call while you are on a call, press and hold the Multi-Function button for 2 seconds.

You can switch between calls by pressing and holding it for 2 seconds.

Depending on your phone, this feature may not be supported.

•Place a call on hold

While you are on a call, press and hold the Multi-Function button for 2 seconds.

To retrieve the call, press and hold the Multi-Function button for 2 seconds again.

Depending on your phone, this feature may not be supported.

•Switch off the microphone

Press and hold the Up volume control button to switch off the headset's microphone.

To switch it back on, press and hold the button again.

Troubleshooting

My phone does not find my headset. Make sure the blue indicator light on your headset turns on when your phone is searching for devices.

My headsest worked before but now it is not working.

Make sure your phone is on and the Bluetooth feature is turned on in your phone.

If the Bluetooth feature has been turnned off or was turned on only temporarily, you may need to restart the Bluetooth feature.

If you have confirmed the Bluetooth feature is on in your phone, pair your phone and headset again.

Meaning of the indicator light

Light	Tone	Status
Flashes in	Quick series	The headset is in Active mode.
blue every	of 2 tones.	• The headset has an active
8 seconds.	(Active mode
		call in progress.
	starts.)
		• You can talk up to 4 hours.
Flashes in	Quick series	The headset is in Standby mode.
blue every 3	of 2 tones.	• The headset is waiting
seconds.	(Standby
		for a call.
	mode starts.)
		• The headset can be in
		Standby mode up to 70
		hours.*
Flashes in	5 tones every	The battery of the headset is
red instead	20 seconds.	low. Recharge the battery.
of blue.		• There is only 1 minute of
		talk time left.

*Depending on the phone type and usage, the actual time may vary.