American DJ HMI 575TM specifications Chart ONE, DMX Channel

TEMPEST II™ Instructions CONT .

The Tempest ll ™ is now Linkable with Master / Slave capability! To use this function set the MASTER unit Dipswitch #10 on. Then connect with the XLR Cable using the Female XLR to the second unit input Male XLR , Turn all Dipswitches off on the SLAVE unit. and it will respond the same as the MASTER unit.

In addition you can select the program you want by using a DMX 512 Controller. The values needed are in Chart ONE below.The Tempest ll ™ uses 1 channel to control program selection. Please select the starting address by using the dip switches.

	CHART ONE
Value	Result
0-7	Blackout
8-15	Program 1
16-23	Program 2
24-31	Program 3
32-39	Program 4
40-47	Program 5
48-55	Program 6
56-63	Program 7
64-71	Program 8
72-79	Program 9
80-87	Program 10
88-95	Program 11
96-103	Program 12
104-111	Program 13
112-119	Program 14
120-127	Program 15
128-135	Program 16
136-143	Program 17
144-151	Program 18
152-159	Program 19
160-167	Program 20
168-175	Program 21
176-183	Program 22
184-191	Program 23
192-199	Program 24
200-207	Program 25
208-215	Program 26
216-223	Program 27
224-231	Program 28
232-255	Random
	Programs

	DMX CHANNEL
	2		8		32 128
ON
1	2	3	4	5	6	7	8	9	10
1		4		16		64 256

Each # above has an ADDRESS based on binary code.

#1 ADDRESS is 1
#2	“	“	2
#3	“	“	4
#4	“	“	8
#5	“	“	16
#6	“	“	32
#7	“	“	64
#8	“	“	128
#9	“	“	256
#10	is not used with DMX but to select Master / Slave
ALWAYS SET THE ADDRESS ONE LESS THAN THE
CHANNEL WANTED.
You set the ADDRESS wanted by COMBINING the
Dipswitches.
EXAMPLE:
Set ADDRESS at 0 to start at CHANNEL 1
( all Dipswitches OFF)
Set ADDRESS for 21				Set ADDRESS for 201
to start at CHANNEL 22				to start at CHANNEL 202
Dipswitches # 1 =1				Dipswitches # 1 = 1
		3 = 4		4 = 8
		5 = 16		7 = 64
		= 21		8 = 128
				= 201

American DJ® LOS ANGELES, CA. 90058 PG 2 OF 2