operating Instructions, tips
RACK DRY
Installing the drying rack
1.Open the dryer door.
2.Position the drying rack in the tumbler, placing the front lip of the drying rack on the top of the lint filter.
3.Place the rear legs in the two recessed areas of the dryer’s back wall, then push down the middle of the drying rack to fix.
4.Place the items to be dried on the rack, leaving space between them so air can circulate.
5.Close the dryer door.
6.Use the Time Dry cycle. Select the time according to the moisture and weight of the items. Start the dryer. It may be necessary to reset the timer if a longer drying time is needed.
SUGGESTED ITEMS | SUGGESTED TEMP. SETTINGS |
|
|
Washable sweaters | Heat (Extra Low) |
(block to shape and lay flat on rack) |
|
|
|
Stuffed toys | Heat (Extra Low) |
(cotton or polyester fiberfilled) |
|
|
|
Stuffed toys | Air Fluff |
(foam or |
|
|
|
Foam rubber pillows | Air Fluff |
|
|
Sneakers | Air Fluff |
|
|
Drying foam rubber, plastic, or rubber on a heat setting may cause damage to the items WARNING and lead to a fire hazard.
