Chapter 3 Quick Installation Guide

This Chapter will guide you to configure the AP to function in your network and gain access to the internet through your ISP immediately after successful configuration. More detailed description of the AP’s web-based utility and functions can be found in “Chapter 4 Configuring the AP”

3.1Configure the Device

The instructions in this section will help you configure each of your PCs to be able to communicate with the AP.

The default IP address of the TL-WA5210G 2.4GHz High Power Wireless Outdoor CPE is 192.168.1.254. And the default Subnet Mask is 255.255.255.0. These values can be seen from the LAN. They can be changed as you desire, as an example we use the default values for description in this guide.

Connect the local PC to the LAN ports of the AP. There are then two ways to configure the IP address for your PC.

¾Configure the IP address manually

1)Set up the TCP/IP Protocol for your PC. If you need instructions as to how to do this,

please refer to Appendix2B: Configuring the PC

2)Configure the network parameters. The IP address is 192.168.1.xxx ("xxx" is from 1 to 253), Subnet Mask is 255.255.255.0, and Gateway is 192.168.1.254 (The AP's default IP address)

¾Obtain an IP address automatically

This method can be available only when DHCP in section 4.7.1 is enabled.

1)Set up the TCP/IP Protocol in "Obtain an IP address automatically" mode on your PC. If you need instructions as to how to do this, please refer to Appendix B: Configuring the PC.

2)Power off the AP and PC. Then turn on the AP and restart the PC. The built-in DHCP server will assign IP address for the PC.

)Note:

For Windows 98 OS or earlier, the PC and AP may need to be restarted.

Now, you can run the Ping command in the command prompt to verify the network connection between your PC and the AP. The following example is in Windows 2000 OS.

Open a command prompt, and type ping 192.168.1.254, and then press Enter.

If the result displayed is similar to that shown in Figure 3-1,the connection between your PC and the AP has been established.

7

Page 14 Page 16
Page 15
Image 15
TP-Link TL-WA5210G manual Quick Installation Guide, Configure the Device
Page 14 Page 16

TL-WA5210G specifications

The TP-Link TL-WA5210G is a powerful outdoor wireless access point designed to provide extended coverage and high-speed wireless connectivity in challenging environments. Targeted at outdoor networking applications, this device is commonly utilized for establishing wireless connections across open areas, such as campuses, farms, and remote sites where traditional wired connections may not be feasible.

One of the standout features of the TL-WA5210G is its robust 12dBi directional antenna, which significantly enhances the range and signal strength. By focusing the wireless signal in a specific direction, users can enjoy stable connections over long distances, often exceeding 5 kilometers under optimal conditions. This long-range capability is complemented by support for IEEE 802.11g and IEEE 802.11b standards, providing a flexible and reliable wireless solution.

Equipped with a 5km wireless range, the TL-WA5210G operates on the 2.4GHz frequency band, enabling data transfer rates of up to 54Mbps. Users can also take advantage of a variety of modulation schemes, which optimize the device's performance in diverse environments. In addition, the access point supports WDS (Wireless Distribution System) functionality, allowing for the seamless expansion of wireless networks.

The device boasts an IP65-rated enclosure, making it highly resistant to dust and water, which is essential for outdoor installations. Furthermore, the TL-WA5210G operates in extreme temperatures, ranging from -30°C to 70°C, ensuring reliable performance in varying weather conditions.

For enhanced security, the TL-WA5210G incorporates multiple encryption protocols, including WEP, WPA, and WPA2, safeguarding users against potential threats. The user-friendly web interface facilitates easy installation and management, allowing users to configure settings quickly and efficiently.

In summary, the TP-Link TL-WA5210G is an ideal solution for anyone needing a reliable outdoor wireless access point. Its long-range capability, durable design, and comprehensive security features make it suitable for a wide range of applications, ensuring expansive and secure wireless coverage in outdoor settings. Whether for home, business, or community projects, the TL-WA5210G stands out as a versatile and efficient networking solution.
Top Page Image Contents