TP-Link TL-WA5210G manual Dhcp, Throughput Monitor

4.6.8Throughput Monitor

Selecting Wireless > Throughput Monitor will helps to watch wireless throughput information in the following screen shown in Figure 4-20.

Figure 4-20 Wireless Throughput

¾Rate - The Throughput unit.

¾Run Time - How long this function is running.

¾Transmit- Wireless transmit rate information.

¾Receive- Wireless receive rate information.

Click the Start button to start wireless throughput monitor.

Click the Stop button to stop wireless throughput monitor.

4.7DHCP

DHCP stands for Dynamic Host Configuration Protocol. The DHCP Server will automatically assign dynamic IP addresses to the computers on the network. This protocol simplifies network management and allows new wireless devices to receive IP addresses automatically without the need to manually assign new IP addresses.

There are three submenus under the DHCP menu (shown as Figure 4-21):DHCP Settings, DHCP Clients List and Address Reservation. Clicking any of them will enable you to configure the corresponding function. The detailed explanations for each submenu are provided below.

32