¾: This is where you can connect an outside antenna. For this AP, the antenna is built inside, and usually there is not necessary to connect an outside one.

¾LAN: This port is used to connect to the POE port of the provided Power Injector.

¾RESET:

There are two ways to reset the AP's factory defaults:

•Use the Factory Defaults function on System Tools ->Factory Defaults page in the AP's Web-based Utility.

•Use the Factory Default Reset button: Press and hold the RESET button for at least 5 seconds, and then the AP reboots after the LED at the rightmost in Figure 2-1flashes.

)Note:

Ensure the AP is powered on before it restarts completely.

2.3System Requirements

¾Each PC in the LAN needs a working Ethernet Adapter and an Ethernet cable with RJ45 connectors

¾TCP/IP protocol must be installed on each PC

¾Web browser, such as Microsoft Internet Explorer 5.0 or later, Netscape Navigator 6.0 or later

¾If the device is configured to AP client router mode, you also need:

Wireless Internet Access Service (WISP).

¾If the device is configured to AP router mode, you also need: Broadband Internet Access Service (DSL/Cable/Ethernet)

¾One DSL/Cable Modem that has an RJ45 connector (you do not need it if you connect the router to the Ethernet)

2.4Environment Requirements

¾Do not place in direct sunlight or near a heater or heating vent

¾Do not cluttered or crowded. There should be at least 2 inches (5 cm) of clear space on all sides of the router

¾Well ventilated (especially if it is in a closet)

¾Operating temperature: -20℃~65℃

¾Operating Humidity: 10%~90% RH, Non-condensing

2.5Connecting the Device

Figure 2-3is an example of an infrastructure network incorporating the TL-WA5210G. An Infrastructure network contains an access point or a wireless router. To establish an infrastructure network in AP mode, please take the following steps:

1.You will need broadband Internet access (a Cable or DSL-subscriber line into your home or office). Consult with your Cable or DSL provider for proper installation of the modem.

2.Connect the Cable or DSL modem to a Router. Quickly install the router.

3.Locate an optimum location for the AP. Choose an elevated location where trees, buildings and large steel structures will not obstruct the antenna signals and which offers maximum line

5

Page 12 Page 14
Page 13
Image 13
TP-Link TL-WA5210G manual System Requirements, Environment Requirements, Connecting the Device
Page 12 Page 14

TL-WA5210G specifications

The TP-Link TL-WA5210G is a powerful outdoor wireless access point designed to provide extended coverage and high-speed wireless connectivity in challenging environments. Targeted at outdoor networking applications, this device is commonly utilized for establishing wireless connections across open areas, such as campuses, farms, and remote sites where traditional wired connections may not be feasible.

One of the standout features of the TL-WA5210G is its robust 12dBi directional antenna, which significantly enhances the range and signal strength. By focusing the wireless signal in a specific direction, users can enjoy stable connections over long distances, often exceeding 5 kilometers under optimal conditions. This long-range capability is complemented by support for IEEE 802.11g and IEEE 802.11b standards, providing a flexible and reliable wireless solution.

Equipped with a 5km wireless range, the TL-WA5210G operates on the 2.4GHz frequency band, enabling data transfer rates of up to 54Mbps. Users can also take advantage of a variety of modulation schemes, which optimize the device's performance in diverse environments. In addition, the access point supports WDS (Wireless Distribution System) functionality, allowing for the seamless expansion of wireless networks.

The device boasts an IP65-rated enclosure, making it highly resistant to dust and water, which is essential for outdoor installations. Furthermore, the TL-WA5210G operates in extreme temperatures, ranging from -30°C to 70°C, ensuring reliable performance in varying weather conditions.

For enhanced security, the TL-WA5210G incorporates multiple encryption protocols, including WEP, WPA, and WPA2, safeguarding users against potential threats. The user-friendly web interface facilitates easy installation and management, allowing users to configure settings quickly and efficiently.

In summary, the TP-Link TL-WA5210G is an ideal solution for anyone needing a reliable outdoor wireless access point. Its long-range capability, durable design, and comprehensive security features make it suitable for a wide range of applications, ensuring expansive and secure wireless coverage in outdoor settings. Whether for home, business, or community projects, the TL-WA5210G stands out as a versatile and efficient networking solution.
Top Page Image Contents