2.LAN IP Address - Enter a LAN IP Address or a range of LAN IP addresses in the field, in dotted-decimal notation format. For example, 192.168.1.20 - 192.168.1.30. Keep the field blank, which means all LAN IP Addresses have been put into the field.

3.LAN Port - Enter a LAN Port or a range of LAN ports in the field. For example, 1030 - 2000. Keep the field blank, which means all LAN ports have been put into the field.

4.WAN IP Address - Enter a WAN IP Address or a range of WAN IP Addresses in the field, in dotted-decimal notation format. For example, 61.145.238.6 - 61.145.238.47. Keep the field blank, which means all WAN IP Addresses have been put into the field.

5.WAN Port -Enter a WAN Port or a range of WAN Ports in the field. For example, 25 - 110. Keep the field blank, which means all WAN Ports have been put into the field.

6.Protocol - Select which protocol is to be used, either TCP, UDP, or All (all protocols supported by the router).

7.Action - Select either Allow or Deny through the router.

8.Status - Select Enabled or Disabled for this entry from the Status pull-down list.

Click the Save button to save this entry.

To add another entry, repeat steps 1-9.

When finished, click the Back button.

To modify or delete an existing entry:

1.Click the Modify in the entry you want to modify. If you want to delete the entry, click the Delete.

2.Modify the information.

3.Click the Save button.

Click the Enable All button to make all entries enabled.

Click the Disabled All button to make all entries disabled.

Click the Delete All button to delete all entries.

You can change the entry’s order as desired. Fore entries are before hind entries. Enter the ID number in the first box you want to move and another ID number in second box you want to move to, and then click the Move button to change the entry’s order.

Click the Next button to the next page and click the Previous button to return to the previous page.

For example: If you desire to block E-mail received and sent by the IP Address 192.168.1.7 on your local network, and to make the PC with IP Address 192.168.1.8 unable to visit the website of IP Address 202.96.134.12, while other PC(s) have no limit you should specify the following IP address filtering list:

4.10.3Domain Filtering

Selecting Security > Domain Filtering will allows you to configure the domain filtering entery as shown in Figure 4-38.

44

Page 51 Page 53
Page 52
Image 52
TP-Link TL-WA5210G manual Domain Filtering
Page 51 Page 53

TL-WA5210G specifications

The TP-Link TL-WA5210G is a powerful outdoor wireless access point designed to provide extended coverage and high-speed wireless connectivity in challenging environments. Targeted at outdoor networking applications, this device is commonly utilized for establishing wireless connections across open areas, such as campuses, farms, and remote sites where traditional wired connections may not be feasible.

One of the standout features of the TL-WA5210G is its robust 12dBi directional antenna, which significantly enhances the range and signal strength. By focusing the wireless signal in a specific direction, users can enjoy stable connections over long distances, often exceeding 5 kilometers under optimal conditions. This long-range capability is complemented by support for IEEE 802.11g and IEEE 802.11b standards, providing a flexible and reliable wireless solution.

Equipped with a 5km wireless range, the TL-WA5210G operates on the 2.4GHz frequency band, enabling data transfer rates of up to 54Mbps. Users can also take advantage of a variety of modulation schemes, which optimize the device's performance in diverse environments. In addition, the access point supports WDS (Wireless Distribution System) functionality, allowing for the seamless expansion of wireless networks.

The device boasts an IP65-rated enclosure, making it highly resistant to dust and water, which is essential for outdoor installations. Furthermore, the TL-WA5210G operates in extreme temperatures, ranging from -30°C to 70°C, ensuring reliable performance in varying weather conditions.

For enhanced security, the TL-WA5210G incorporates multiple encryption protocols, including WEP, WPA, and WPA2, safeguarding users against potential threats. The user-friendly web interface facilitates easy installation and management, allowing users to configure settings quickly and efficiently.

In summary, the TP-Link TL-WA5210G is an ideal solution for anyone needing a reliable outdoor wireless access point. Its long-range capability, durable design, and comprehensive security features make it suitable for a wide range of applications, ensuring expansive and secure wireless coverage in outdoor settings. Whether for home, business, or community projects, the TL-WA5210G stands out as a versatile and efficient networking solution.
Top Page Image Contents