Nortel Networks 6.1 Using User Preferences, Enter the Basic password the default passwords is

User Preferences

The User Preferences section of programming allows you to program memory buttons, speed dial codes and other settings for any Norstar or BST telephone on the system.

For example, an employee may want to have the Do Not Disturb feature programmed onto a memory button or may want to create a speed dial code. Instead of programming from the employee’s telephone, you can go into programming on the telephone nearest you to make the change.

Using User Preferences

1.	Press	(	).
2.	Preferences.￿••Ë͉Â￿••°‡‹‡		).
	Enter the Basic password (the default passwords is

(Note: You can also use the Coordinator password ¤¤‡›¤to change User preferences.

By using a Basic password, it is possible to have someone else do day-to- day upkeep of telephones without giving out access to sensitive programming. See ‘‘Using passwords’’ on page 225.

After you enter the proper password, the display shows you the telephone with the lowest internal number followed by its name (For example, 21:RECEPTN).

1. Press ‘to move through all the telephones on the system.

2. Press ≠when you see the telephone you want to change. The display shows the model number of the telephone at the extension. The display shows Connect set if no telephone is connected at that internal number. You cannot make changes if the model is Other.

3. Press ‘to move through all the subheadings in User

P0603544 02 Compact ICS 6.1 System Coordinator Guide